Files
zjui-ece445/stm32/Inc/main.h

116 lines
3.7 KiB
C

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.h
* @brief : Header for main.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_hal.h"
#include "stm32f1xx_ll_rcc.h"
#include "stm32f1xx_ll_bus.h"
#include "stm32f1xx_ll_system.h"
#include "stm32f1xx_ll_exti.h"
#include "stm32f1xx_ll_cortex.h"
#include "stm32f1xx_ll_utils.h"
#include "stm32f1xx_ll_pwr.h"
#include "stm32f1xx_ll_dma.h"
#include "stm32f1xx_ll_gpio.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include <stdint.h>
#include <stdio.h>
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define EN_MICS6814_Pin GPIO_PIN_1
#define EN_MICS6814_GPIO_Port GPIOA
#define USART2_TX_PMS5003_Pin GPIO_PIN_2
#define USART2_TX_PMS5003_GPIO_Port GPIOA
#define USART2_RX_PMS5003_Pin GPIO_PIN_3
#define USART2_RX_PMS5003_GPIO_Port GPIOA
#define ADC1_IN4_MICS6814_CO_Pin GPIO_PIN_4
#define ADC1_IN4_MICS6814_CO_GPIO_Port GPIOA
#define ADC1_IN4_MICS6814_NH3_Pin GPIO_PIN_5
#define ADC1_IN4_MICS6814_NH3_GPIO_Port GPIOA
#define ADC1_IN4_MICS6814_NO2_Pin GPIO_PIN_6
#define ADC1_IN4_MICS6814_NO2_GPIO_Port GPIOA
#define USART3_TX_ESP8266_Pin GPIO_PIN_10
#define USART3_TX_ESP8266_GPIO_Port GPIOB
#define USART3_RX_ESP8266_Pin GPIO_PIN_11
#define USART3_RX_ESP8266_GPIO_Port GPIOB
#define EN_LED_Pin GPIO_PIN_12
#define EN_LED_GPIO_Port GPIOB
#define EN_GPS_Pin GPIO_PIN_14
#define EN_GPS_GPIO_Port GPIOB
#define EN_PMS5003_Pin GPIO_PIN_15
#define EN_PMS5003_GPIO_Port GPIOB
#define EN_ESP8266_Pin GPIO_PIN_8
#define EN_ESP8266_GPIO_Port GPIOA
#define USART1_TX_GPS_Pin GPIO_PIN_9
#define USART1_TX_GPS_GPIO_Port GPIOA
#define USART1_RX_GPS_Pin GPIO_PIN_10
#define USART1_RX_GPS_GPIO_Port GPIOA
#define TOGGLE_BAT_Pin GPIO_PIN_5
#define TOGGLE_BAT_GPIO_Port GPIOB
#define I2C1_SCL_BME680_Pin GPIO_PIN_6
#define I2C1_SCL_BME680_GPIO_Port GPIOB
#define I2C1_SDA_BME680_Pin GPIO_PIN_7
#define I2C1_SDA_BME680_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/