Files
zjui-ece385-final/qsys/synthesis/submodules/ECE385_usb_nios2_onchip_mem.v

90 lines
3.1 KiB
Verilog
Executable File

//Legal Notice: (C)2019 Altera Corporation. All rights reserved. Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors. Please refer to the applicable
//agreement for further details.
// synthesis translate_off
`timescale 1ns / 1ps
// synthesis translate_on
// turn off superfluous verilog processor warnings
// altera message_level Level1
// altera message_off 10034 10035 10036 10037 10230 10240 10030
module ECE385_usb_nios2_onchip_mem (
// inputs:
address,
byteenable,
chipselect,
clk,
clken,
freeze,
reset,
reset_req,
write,
writedata,
// outputs:
readdata
)
;
parameter INIT_FILE = "C:/Users/xuyh0/Desktop/zjui-ece385/final/ECE385_usb_src/ECE385_usb.hex";
output [ 31: 0] readdata;
input [ 11: 0] address;
input [ 3: 0] byteenable;
input chipselect;
input clk;
input clken;
input freeze;
input reset;
input reset_req;
input write;
input [ 31: 0] writedata;
wire clocken0;
wire [ 31: 0] readdata;
wire wren;
assign wren = chipselect & write & clken;
assign clocken0 = clken & ~reset_req;
altsyncram the_altsyncram
(
.address_a (address),
.byteena_a (byteenable),
.clock0 (clk),
.clocken0 (clocken0),
.data_a (writedata),
.q_a (readdata),
.wren_a (wren)
);
defparam the_altsyncram.byte_size = 8,
the_altsyncram.init_file = INIT_FILE,
the_altsyncram.lpm_type = "altsyncram",
the_altsyncram.maximum_depth = 4096,
the_altsyncram.numwords_a = 4096,
the_altsyncram.operation_mode = "SINGLE_PORT",
the_altsyncram.outdata_reg_a = "UNREGISTERED",
the_altsyncram.ram_block_type = "AUTO",
the_altsyncram.read_during_write_mode_mixed_ports = "OLD_DATA",
the_altsyncram.read_during_write_mode_port_a = "DONT_CARE",
the_altsyncram.width_a = 32,
the_altsyncram.width_byteena_a = 4,
the_altsyncram.widthad_a = 12;
//s1, which is an e_avalon_slave
//s2, which is an e_avalon_slave
endmodule