211 lines
6.6 KiB
Verilog
211 lines
6.6 KiB
Verilog
// ECE385_eth0_tx_dma_buffer.v
|
|
|
|
// This file was auto-generated from altera_avalon_st_adapter_hw.tcl. If you edit it your changes
|
|
// will probably be lost.
|
|
//
|
|
// Generated using ACDS version 18.1 625
|
|
|
|
`timescale 1 ps / 1 ps
|
|
module ECE385_eth0_tx_dma_buffer #(
|
|
parameter inBitsPerSymbol = 8,
|
|
parameter inUsePackets = 1,
|
|
parameter inDataWidth = 32,
|
|
parameter inChannelWidth = 0,
|
|
parameter inErrorWidth = 0,
|
|
parameter inUseEmptyPort = 1,
|
|
parameter inUseValid = 1,
|
|
parameter inUseReady = 1,
|
|
parameter inReadyLatency = 0,
|
|
parameter outDataWidth = 8,
|
|
parameter outChannelWidth = 0,
|
|
parameter outErrorWidth = 0,
|
|
parameter outUseEmptyPort = 0,
|
|
parameter outUseValid = 1,
|
|
parameter outUseReady = 1,
|
|
parameter outReadyLatency = 0
|
|
) (
|
|
input wire in_clk_0_clk, // in_clk_0.clk
|
|
input wire in_rst_0_reset, // in_rst_0.reset
|
|
input wire [31:0] in_0_data, // in_0.data
|
|
input wire in_0_valid, // .valid
|
|
output wire in_0_ready, // .ready
|
|
input wire in_0_startofpacket, // .startofpacket
|
|
input wire in_0_endofpacket, // .endofpacket
|
|
input wire [1:0] in_0_empty, // .empty
|
|
output wire [7:0] out_0_data, // out_0.data
|
|
output wire out_0_valid, // .valid
|
|
input wire out_0_ready, // .ready
|
|
output wire out_0_startofpacket, // .startofpacket
|
|
output wire out_0_endofpacket // .endofpacket
|
|
);
|
|
|
|
generate
|
|
// If any of the display statements (or deliberately broken
|
|
// instantiations) within this generate block triggers then this module
|
|
// has been instantiated this module with a set of parameters different
|
|
// from those it was generated for. This will usually result in a
|
|
// non-functioning system.
|
|
if (inBitsPerSymbol != 8)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inbitspersymbol_check ( .error(1'b1) );
|
|
end
|
|
if (inUsePackets != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inusepackets_check ( .error(1'b1) );
|
|
end
|
|
if (inDataWidth != 32)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
indatawidth_check ( .error(1'b1) );
|
|
end
|
|
if (inChannelWidth != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inchannelwidth_check ( .error(1'b1) );
|
|
end
|
|
if (inErrorWidth != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inerrorwidth_check ( .error(1'b1) );
|
|
end
|
|
if (inUseEmptyPort != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inuseemptyport_check ( .error(1'b1) );
|
|
end
|
|
if (inUseValid != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inusevalid_check ( .error(1'b1) );
|
|
end
|
|
if (inUseReady != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inuseready_check ( .error(1'b1) );
|
|
end
|
|
if (inReadyLatency != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
inreadylatency_check ( .error(1'b1) );
|
|
end
|
|
if (outDataWidth != 8)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outdatawidth_check ( .error(1'b1) );
|
|
end
|
|
if (outChannelWidth != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outchannelwidth_check ( .error(1'b1) );
|
|
end
|
|
if (outErrorWidth != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outerrorwidth_check ( .error(1'b1) );
|
|
end
|
|
if (outUseEmptyPort != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outuseemptyport_check ( .error(1'b1) );
|
|
end
|
|
if (outUseValid != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outusevalid_check ( .error(1'b1) );
|
|
end
|
|
if (outUseReady != 1)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outuseready_check ( .error(1'b1) );
|
|
end
|
|
if (outReadyLatency != 0)
|
|
begin
|
|
initial begin
|
|
$display("Generated module instantiated with wrong parameters");
|
|
$stop;
|
|
end
|
|
instantiated_with_wrong_parameters_error_see_comment_above
|
|
outreadylatency_check ( .error(1'b1) );
|
|
end
|
|
endgenerate
|
|
|
|
ECE385_eth0_tx_dma_buffer_data_format_adapter_0 data_format_adapter_0 (
|
|
.clk (in_clk_0_clk), // clk.clk
|
|
.reset_n (~in_rst_0_reset), // reset.reset_n
|
|
.in_data (in_0_data), // in.data
|
|
.in_valid (in_0_valid), // .valid
|
|
.in_ready (in_0_ready), // .ready
|
|
.in_startofpacket (in_0_startofpacket), // .startofpacket
|
|
.in_endofpacket (in_0_endofpacket), // .endofpacket
|
|
.in_empty (in_0_empty), // .empty
|
|
.out_data (out_0_data), // out.data
|
|
.out_valid (out_0_valid), // .valid
|
|
.out_ready (out_0_ready), // .ready
|
|
.out_startofpacket (out_0_startofpacket), // .startofpacket
|
|
.out_endofpacket (out_0_endofpacket) // .endofpacket
|
|
);
|
|
|
|
endmodule
|